-
Power
2820W
-
Hashrate
11.00 TH/s
-
Efficiency
256.36 J/T
-
Algorithm
Blake (2b-Sia)
Goldshell SC5 Pro Siacoin Miner 11TH/s
from US$1,550.00
Top Hashrate : Up to 100% better than the previous generation
High Stability : Supports 24/7 continuous operation
Preparation : Minimum 24‑72hrs functional testing for used units.
Warranty : Come with 6-month factory warranty.
SC5 Pro Profitability Calculator
Daily Earning
ROI
Electricity
Electricity ratio
Net Profit
Miner Profitability History
Goldshell SC5 Pro: Siacoin mining and BTCB2 compatibility
Goldshell SC5 Pro is listed for Siacoin (SC) mining using BLAKE2b-Sia hardware. Select the exact condition and variant before ordering.
| Mode / network | Rated hashrate | Rated power | Basis |
|---|---|---|---|
| Siacoin (SC) | 11 TH/s | 2820 W | Existing store nominal rating; not a BTCB2 measurement |
Choose the exact variant: this listing includes alternative model/condition selections. The ratings and compatibility below apply only to Goldshell SC5 Pro. An upgrade or different hashrate selection needs its own specification and firmware check.
Goldshell also rates low-power mode at 8.8 TH/s and 2,020 W (±5%). Manufacturer specifications.
Can Goldshell SC5 Pro mine BTCB2?
Pool/project-listed. BTCB2 here means Bitcoin BLAKE2b, the independent BLAKE2b chain; it is neither SHA-256 Bitcoin (BTC) nor Siacoin (SC). The project miner guide explicitly names Goldshell SC5 Pro. This evidence does not extend to SC5 Pro II or upgraded variants. Compatibility evidence / specification source (checked September 8, 2026).
No BT-Miners hardware test is claimed. Network connection, accepted shares, pool reward credit and a completed payout are four separate checks. Confirm the exact firmware, work mode and pool protocol on one unit before expanding.
What should I check before buying?
Confirm the selected unit’s electrical input, circuit capacity, wall power, ventilation, condition and firmware. Store ratings do not establish BTCB2 earnings. Use a wallet explicitly supporting this chain and keep its setup separate from BTC and SC.
Are the displayed earnings BTCB2 income?
BTCB2 estimate unavailable. No reliable BTCB2 valuation and end-to-end mining data were verified for this listing. Do not interpret a Siacoin, Handshake or rental estimate as BTCB2 revenue. Check the calculator’s selected coin, data time, fees and electricity assumptions; profitability and payback are not guaranteed.
Read the BTCB2 mining and compatibility guide · Pool setup and share/payout verification · Compare Siacoin miners
Technical Specifications
| Product Glance | Value |
|---|---|
| Model | SC5 Pro |
| Crypto algorithm/coins | Blake (2b-Sia)|SC |
| Typical hashrate | 11.00 TH/s |
| Power on wall @35℃, Watt | 2820W |
| Detailed Characteristics | Value |
|---|---|
| Power Supply | |
| Input voltage, Volt | 180-280V |
| Input max current, Amp | 16A |
| Hardware Configuration | |
| Networking connection mode | Ethernet |
| Server size(length*width*height, w/o package), mm | 370x305x450 (mm) |
| Net weight, kg | 13.1kg |
| Noise@30℃, dBA | 35 |
| Environment Requirements | Value |
|---|---|
| Storage temperature, °C | -20~70 |
| Operation humidity(non-condensing), RH | 10~65% |
| Operation temperature,°C | 0 – 35 °C |
| Operation altitude, m | ≤2000 |
| What's in the Box | Value |
|---|---|
| Original factory mining machinery | ✓ |
| Power supply | ✓ |
| Shockproof packaging | ✓ |
(1) The hashrate value, power on wall, and power efficiency on wall are all typical values. The actual hashrate value fluctuates by ±3%, and the actual power on wall and power efficiency on wall fluctuate by ±5%.
(2) Caution: Wrong input voltage may cause server damaged.
(3) The noise is loudest when the fan is under maximum RPM(rotation per minute).
(4) When the server is used at an altitude from 900m to 2000m, the highest operating temperature decreases by 1℃ for every increase of 300m.
Estimate time
Please select your preferred product batch – Available Now (In Stock) for immediate shipment or Month Batch for delivery within your chosen timeframe. If no selection is needed, the product is in stock and ready to ship. If you haven’t received your miner after the estimated time, please contact us at store@bt-miners.com, and our team will assist you promptly.
Shipping
All used miners will undergo testing by our certified technicians before shipping, which requires 3-5 business days. New miners will be shipped from our Shenzhen or Hong Kong warehouse, with international delivery taking approximately 5-10 business days via DHL. Once your order is shipped, you will receive a confirmation email with a tracking number. Shipping fees are calculated based on product type and weight, varying by region.
Returning policy
All sales are final and non-refundable after shipment, but we offer repair and replacement services if there are technical issues with your miner.
Goldshell SC5 Pro overview
Siacoin ASIC. 11 TH/s at 2820 W nominal; confirm the selected batch and mode. BTCB2: Pool/project-listed. Exact-model pool/project documentation exists; unit-level shares and payouts are not verified. Check BTCB2 compatibility before purchase. Income currency: For Sia mode, read revenue as a Siacoin (SC) estimate, not BTCB2 earnings. BTCB2 estimate unavailable. Verify the selected coin and operating mode before comparing costs.
Comparison with Goldshell SC6 SE
When comparing the Goldshell SC5 Pro with the SC6 SE, several aspects come into play. In terms of hash rate and performance, the SC5 Pro has a default hash rate of 11 TH/s ±5% and a low-power mode rate of 8.8 TH/s ±5%, while the SC6 SE’s performance in this regard remains to be seen. The energy consumption ratios of the SC5 Pro are 256 J/TH in default and 229 J/TH in low-power mode, and the SC6 SE’s energy efficiency will be a key point of comparison. The mining algorithms and supported coins also differ, as the SC5 Pro uses Blake2b for Siacoin, while the SC6 SE may have other options. The cooling systems and durability, as well as remote management capabilities, such as the SC5 Pro’s multifunctional application for remote monitoring, will vary between the two models, all of which are important considerations when choosing between them.
-
Processing & Shipping Time
-
Payment Policies
-
Taxes and Custom Duties
Order Processing: All orders are processed and dispatched within 72 hours after verified full payment, unless otherwise stated. Pre-orders typically ship at the end of the month of the batch but may be delayed if the manufacturer delays release/shipment. In stock machines ship in 3-7 business days from our warehouse in China. Bulk orders may require an additional 1–2 business days for handling.
Shipping Carriers: We always try to ship as soon as we can via reputable international carriers such as DHL, UPS or FedEx after full payment has been received and verified.
Estimated Delivery: Standard international shipping usually takes 4–7 business days to arrive after dispatch. Actual delivery may be affected by customs clearance and local carrier conditions, with total delivery time ranging from 8–10 business days.
Contact us at store@bt-miners.com or 813-820-0668 if you have any questions.
All products on our website are priced in US Dollars.
Payment made by credit or debit card may be subject to card processing fees.
We can accept payment by credit or debit card, wire transfer, ACH transfer (through our online portal), and crypto.
Bank transfer clearing times vary by bank and location. Cryptocurrency payments are typically confirmed within 1 business day.
*Machine prices will fluctuate according to the current market price.*
Customs & Delivery: Shipments are managed through DHL, UPS and FedEx for most international destinations. Due to changing regulations, we will not be able to cover duty tax for all orders entering USA. Deliveries to other countries may require customers to clear customs and pay duty tax. Please notify us right away if documents are requested by customs as improper filing may result in higher fees and/or delays.
DDP Option: We offer Delivery Duty Paid (DDP) service in select countries, which covers customs, duties, and taxes in the purchase price. Advance arrangement is required – please contact store@bt-miners.com for details.
Returns to Hong Kong: If a product must be returned to Hong Kong, the customer is responsible for all related shipping fees as outlined in our Returns & Refund Policy.
All sales are final and non-refundable on any terms.
Want to find more Similar Miners?
FAQs
-
What Is The Lifespan Of This Mining Machine?
The lifespan of mining hardware is influenced by usage intensity, environmental factors like temperature, humidity, and dust. Proper maintenance and optimal conditions can significantly extend its longevity.
-
How Does Electricity Cost Impact Profitability?
Electricity costs play a crucial role in mining profitability, as high rates can quickly offset profit. Therefore, it is vital to access local electricity costs to determine if mining is viable. With high electricity costs and high liquidity of digital assets, investing in an energy-efficient miner becomes even more important.
