Bitmain Antminer L9 specifications
The Bitmain Antminer L9 is an air-cooled Scrypt ASIC miner for Litecoin (LTC), Dogecoin (DOGE), and other compatible Scrypt proof-of-work coins. The L9 is sold in more than one factory performance specification, so hashrate and wall power must be matched as a pair.
| Hashrate | Power | Typical efficiency |
|---|---|---|
| 16 GH/s | 3,360 W | 210 J/GH |
| 17 GH/s | 3,570 W | 210 J/GH |
Important: Do not combine the 17 GH/s hashrate with the 3,360 W power figure. Some selectable 15 GH/s or 16.5 GH/s labels may represent tested or condition-specific inventory; confirm the exact nameplate specification and condition before ordering.
Shipping timing
- New in-stock: normally dispatched within 1–3 business days after cleared payment.
- Used in-stock: requires testing and is normally dispatched within 3–7 business days after cleared payment.
- Transit: delivery is usually 5–7 business days after dispatch.
- Future batch / preorder: dispatch follows the manufacturer’s actual release schedule. Manufacturer delays may occur, and BT-Miners does not accept liability for losses caused by those delays.
Connecting Your Antminer L9 to Hash-Hut
Litecoin setup:
https://hash-hut.net/mining/litecoin?utm_source=bt-miners&utm_medium=referral
Dogecoin setup:
https://hash-hut.net/mining/dogecoin?utm_source=bt-miners&utm_medium=referral
Technical Specifications
| Product Glance | Value |
|---|---|
| Model | Bitmain Antminer L9 |
| Crypto algorithm/coins | Scrypt / Litecoin and compatible Dogecoin merged mining; credited coins depend on pool support |
| Typical hashrate | 17 GH/s reference; confirm selected batch and mode |
| Power on wall @35℃, Watt | 3570 W reference; manufacturer reference configuration; supplied batches and modes may differ; 25 C inlet air |
| Power efficiency on wall@35℃ | 210.00 J/GH (0.2100 J/MH), calculated from the same 17 GH/s / 3570 W configuration; 25 C inlet air |
| Detailed Characteristics | Value |
|---|---|
| Power Supply | |
| Input voltage, Volt | Single-phase 220-277 V AC; manufacturer L9 reference |
| Input frequency range, Hz | 50~60 |
| Input max current, Amp | 20 |
| Hardware Configuration | |
| Networking connection mode | RJ45 Ethernet 10/100M |
| Server size(length*width*height, w/o package), mm | 400 x 195 x 290 mm |
| Server size(length*width*height, with package), mm | 570 x 316 x 430 mm |
| Net weight, kg | 14.2 kg |
| Gross weight, kg | 16.3 kg |
| Noise@30℃, dBA | 75 dBA at 25 C with maximum fan speed; manufacturer reference |
| Environment Requirements | Value |
|---|---|
| Storage temperature, °C | -20~70 (seller-listed; confirm exact supplied revision and measurement basis) |
| Operation humidity(non-condensing), RH | 10~90% (seller-listed; confirm exact supplied revision and measurement basis) |
| Operation temperature,°C | -20 to 45 C ambient; apply manufacturer altitude derating |
| Operation altitude, m | ≤2000 (seller-listed; confirm exact supplied revision and measurement basis) |
| What's in the Box | Value |
|---|---|
| Original factory mining machinery | ✓ |
| Power supply | ✓ |
| Shockproof packaging | ✓ |
(1) The hashrate value, power on wall, and power efficiency on wall are all typical values. The actual hashrate value fluctuates by ±3%, and the actual power on wall and power efficiency on wall fluctuate by ±5%.
(2) Caution: Wrong input voltage may cause server damaged.
(3) The noise is loudest when the fan is under maximum RPM(rotation per minute).
(4) When the server is used at an altitude from 900m to 2000m, the highest operating temperature decreases by 1℃ for every increase of 300m.






