APW12+ Power supply unit for antminer L7
OUT1
| DC Voltage |
12V-15V |
| Rated Current(220 V input) |
233A |
| Ripple & Noise |
<1% |
| Line Regulation |
<1% |
| Load Regulation |
<1% |
| Setup Time |
<2S |
| Short Circuit Protection |
>10mS |
OUT2
| DC Voltage |
12.3V |
| Rated Current(220 V input) |
15A |
| Ripple & Noise |
<1% |
| Voltage Accuracy |
12.2V---12.4V |
| Line Regulation |
<1% |
| Load Regulation |
<1% |
| Setup Time |
<2S |
| Short Circuit Protection |
>10mS |
Input
| Voltage Range |
200-240V AC |
| Frequency Range |
47-63Hz |
| Power Factor |
>0.99(full load) |
| Leakage Current |
<1.5mA（220V 50Hz） |
Protection
| Low-voltage Input
|
80-89V AC |
| Output Short Circuit |
Yes |
| Overheat Protection |
Yes |
| Over-current Output |
291A-350A
（protection value varies under different voltage） |
Environment
| Operating Temperature |
-20-45℃ |
| Operating Humidity |
20%-90%RH（non-condensing） |
| Altitude |
< 2000m |
Structure
| Dimensions |
254.6mm*251.6mm*63mm |
| Net Weight |
3.6KG |
| Cooling System |
forced‐air cooling |
| Noise |
45dBA |
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
