Scrapped machines will not be repaired

*Note: Example pictures below describe the typical patterns. The fault location and damage degree of different miners are different. The final inspection result shall prevail.

 

1. Corrosion/oxidation: Product is corroded or oxidized partially or completely and can no longer be repaired.

2. PCB bonding pad falling off: Chip bonding pad has fallen off and can no longer be repaired.

3. Board burnt: PCB is burnt partially or massively and can no longer be repaired.

4. PCB board routing burnt: PCB circuit is burnt badly and can no longer be repaired even by jump wire.

5. Bonding pad burnt: PCB bonding pad is burnt badly and can no longer be repaired.

6. PCB fracture: PCB is deformed badly or PCB fractures, and can no longer be repaired.

7. Heat sink or chip falling off: A larger number of chips on the board are damaged badly and can no longer be repaired.

8. Power supply PCB burn-through: PCB is burnt to open circuit or short circuit, and can no longer be repaired.

9. Power supply board burnt: Local circuit and components are burnt badly and can no longer be repaired.

10. Power board circuit burnt: PCB routing is burnt out and can no longer be repaired even by jump wire.

11. Corrosion of power supply PCB board: PCB circuit is corroded to break and can no longer be repaired even by jump wire.

---

When the hash board is returned to our repair sites and is found to be in scrapped condition, we will offer the following options:

1. Dispose of it.

2. Return a similar scrapped hash board at your cost.